MAX6375XR28+T Overview

There are 3 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. For your reference, this PMIC includes a list of SC-70, SOT-323 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 3V is used to conduct the PMIC chip. Power ics operate at 1 supply voltages. Surface Mount mounts IC management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 3 pins that are attached to IC management. Pin count of the power management is 3. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.2V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. There is a 1μA supply current present in the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6375, which is the base power ics number.

MAX6375XR28+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
1μA operating supply current

MAX6375XR28+T Applications

There are a lot of Maxim Integrated MAX6375XR28+T Voltage Supervisors applications.

• Battery cars
• Display equipment
• Power distribution systems of CCU
• Digitally controlled LDO regulators circuit
• Power communication system
• Set top box
• Unattended substation automation
• Power distribution systems of operating room
• Personal computers
• Electrical fire monitoring system