MAX6380UR39+T Overview

There are 3 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find TO-236-3, SC-59, SOT-23-3 functions for you to refer to. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. A supply voltage of 3V is used to conduct the PMIC chip. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount mounts power management on the wall. Power Management Circuits is a subcategory of this PMIC chip. Taking into account all of the pins, this power management has a total of 3. 3 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. There is a supply current of 1μA for the power management. A similar IC managements number of the manufacturer can always be found by using MAX6380, the base power ics number.

MAX6380UR39+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1μA operating supply current

MAX6380UR39+T Applications

There are a lot of Maxim Integrated MAX6380UR39+T Voltage Supervisors applications.

• Efficient information transmission
• Radio
• Analog circuit
• Personal computers
• Set top box
• FPGA design
• emergency room
• Sensitive sensors
• Leakage current detection
• Stable power system