MAX6381LT23D4+T Overview

As you can see, this power management is mounted through 6 terminals. Tape & Reel (TR)-packaging is used. Power management is possible to find a series of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find 6-WDFN functions for you to refer to. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. IC management is specified that the package peak reflow temperature should be 260. A supply voltage of 1.8V is used to conduct the PMIC chip. During operation, the power ic is supplied with a voltage of 1. By Surface Mount, IC management has been mounted. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 6 pins on power management. There are 6 pins on the power managment ic. It is recommended that Vsup should not be less than 1V for this IC power. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. In this case, Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6381, the base power ics number.

MAX6381LT23D4+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6381LT23D4+T Applications

There are a lot of Maxim Integrated MAX6381LT23D4+T Voltage Supervisors applications.

• DSP
• Low voltage/high power - AI, GPU
• Electrical fire monitoring system
• Power distribution systems of infant care room
• Unattended substation automation
• WiFi router
• Data storage applications
• Microprocessor system
• Military communications
• Sensitive sensors