MAX6381LT31D2+T Overview

This power management consists of 6 mounting terminals on which it can be mounted. Power management is packaged in a Tape & Reel (TR) way. The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. Please refer to power management for 6-WFDFN functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 1.8V. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 6. 6 pins are present on the power management system. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type is Surface Mount. Temperature setting for the supervisors should be -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. Supplied with a operating current of 7μA, this PMIC is capable of fully function as specified. You can always use MAX6381, the base supervisor number, to search for similar PMICs of the manufacturer.

MAX6381LT31D2+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6381LT31D2+T Applications

There are a lot of Maxim Integrated MAX6381LT31D2+T Voltage Supervisors applications.

• Microprocessor system
• Magnetic resonance imaging
• Automotive permanent magnet synchronous motors
• DVR
• Electrical fire monitoring system
• Power communication system
• Leakage protection
• Detection of phase loss
• Analog circuit
• Sensitive sensors