MAX6381LT44D1+T Overview

There are 6 terminals connected to this power management, which makes it easy to mount. Power management is packaged in a Tape & Reel (TR) way. There are 1 functions included in this PMIC so that you can refer to them. Power management consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes 6-WFDFN functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts at a voltage of 1.8V. A supply voltage of 1 is used to conduct the PMIC chip. Power management is included in the Surface Mount mount. The power management belongs to the Power Management Circuits subcategory. Power management has a total of 6 pins. 6 pins make up the power management. It is recommended that Vsup should not be less than 1V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~125°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. There is a supply current of 7μA for the power management. You can always use MAX6381, the base supervisor number, to search for similar PMICs of the manufacturer.

MAX6381LT44D1+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6381LT44D1+T Applications

There are a lot of Maxim Integrated MAX6381LT44D1+T Voltage Supervisors applications.

• Battery-powered equipment
• Solar power charger
• Detection of phase sequence
• Display equipment
• External alarm
• Smartphones
• Electronics installed in the vehicle
• Multi-voltage system
• Fire equipment power monitoring system
• Medical-specific insulation monitor