MAX6381LT44D3+T Overview

It is mounted through 6 terminals on the power management. A Strip package is used to package the power management. As a reference, this IC management includes 1 functions for your convenience. Power management consists of 1 channels, each of which can be used independently. There are 6-WFDFN functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 1.8V. When 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. This power ic can be sub-categorized as Power Management Circuits. There are a total of 6 pins on power management. This power management system has 6 pins. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Mounting type Surface Mount is recommended. This range of temperature should be set for the supervisors: -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. There is a supply current of 7μA for the power management.

MAX6381LT44D3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6381LT44D3+T Applications

There are a lot of Maxim Integrated MAX6381LT44D3+T Voltage Supervisors applications.

• Detection of phase sequence
• Functional modules
• Leakage current detection
• Power communication system
• Power distribution systems of operating room
• Dash board
• Fire equipment power monitoring system
• Satellite navigation
• Detection of phase loss
• Smart meter