MAX6381XR16D3-T Overview

This power management consists of 3 mounting terminals on which it can be mounted. Packaging is in the form of a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. Power management consists of 1 channels, each of which can be used independently. IC management is packaged as a SC-70, SOT-323 package. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 245. When a supply voltage of 1.8V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. The mount is provided by Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 3 pins that are attached to IC management. 3 pins make up the power management. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~125°C TA . Power management has an output of Push-Pull, Totem Pole during operation. There is a 7μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using MAX6381, the base power ics number.

MAX6381XR16D3-T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6381XR16D3-T Applications

There are a lot of Maxim Integrated MAX6381XR16D3-T Voltage Supervisors applications.

• Data storage applications
• Leakage protection
• Embedded computing
• Consumer electronics
• Power distribution systems of operating room
• Household appliances
• Network equipment
• Military communications
• Radar
• Display equipment