MAX6381XR23D3+ Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. In this IC power you will find 1 functions for you to refer to. Power management consists of 1 channels, each of which can be used independently. IC management is packaged as a SC-70, SOT-323 package. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 1.8V. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Surface Mount. There is a subcategory called Power Management Circuits for this power management. Power managment ic pin count is 3. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management' mounting is recommended to be done with the Surface Mount type of mounting. Temperature setting for the supervisors should be -40°C~125°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage.

MAX6381XR23D3+ Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V

MAX6381XR23D3+ Applications

There are a lot of Maxim Integrated MAX6381XR23D3+ Voltage Supervisors applications.

• Battery cars
• WiFi router
• Unattended substation automation
• Fire equipment power monitoring system
• Utility meter
• Satellite navigation
• Detection of phase imbalance
• Electronics installed in the vehicle
• Network equipment
• Precision measurement