MAX6381XR24D2+T Overview

There are 3 terminals on this power management that allow it to be mounted. Strip-packaging is used. Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. Please find attached SC-70, SOT-323 functions for your reference in this IC power. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 1.8V is used to conduct the PMIC chip. When 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 3 pins on power management. This power management system has 3 pins. Supply voltage (Vsup) should be at least 1V for this power management. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountIt is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. For this power management, there is an 7μA volt supply current.

MAX6381XR24D2+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6381XR24D2+T Applications

There are a lot of Maxim Integrated MAX6381XR24D2+T Voltage Supervisors applications.

• Stable power system
• Transformer load monitoring equipment
• Magnetic resonance imaging
• Important electronics for automotive protection
• Personal computers
• Battery cars
• Utility meter
• Electrical fire monitoring system
• Military electronics
• Microcontroller system