MAX6381XR30D2+T Overview

There are 3 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in the form of a Tape & Reel (TR), power management is easy to use. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. In this PMIC, you can find SC-70, SOT-323 functions for your reference. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. In a 1.8V supply voltage, the power management conducts. In a 1 supply voltage, the PMIC chip conducts. The mount is attached to Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 3 pins that are attached to IC management. This power management has 3 pins. It is recommended that Vsup should not be less than 1V for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount mounting is recommended. Temperature setting for the supervisors should be -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The power management's supply current is 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6381, the base power ics number.

MAX6381XR30D2+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6381XR30D2+T Applications

There are a lot of Maxim Integrated MAX6381XR30D2+T Voltage Supervisors applications.

• Military communications
• Computer applications
• Radio
• Leakage current detection
• emergency room
• Medical-specific insulation monitor
• Medical-specific isolation transformer
• Power distribution systems of infant care room
• Power distribution systems of ICU
• Power distribution systems of operating room