MAX6381XR44D1+T Overview

There are 3 mounting terminals on the voltage supervisor, each of which has a different function. Tape & Reel (TR)-packaging is used. In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 1 channels. In this IC management you will find SC-70, SOT-323 functions for you to refer to. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When a supply voltage of 1.8V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 1. The power management is mounted by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 3 pins on the board. Pin count of the power management is 3. It is recommended that Vsup should not be less than 1V for this IC power. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. You should set the supervisor's temperature during -40°C~125°C TA . There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. Supplied with a operating current of 7μA, this PMIC is capable of fully function as specified. It is always advisable to use MAX6381, the base supervisor number, when searching for similar PMICs from the manufacturer.

MAX6381XR44D1+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6381XR44D1+T Applications

There are a lot of Maxim Integrated MAX6381XR44D1+T Voltage Supervisors applications.

• Military electronics
• Medical-specific insulation monitor
• Unattended substation automation
• Household appliances
• Microprocessor system
• Radio
• Telecommunications equipment
• Display equipment
• Computer applications
• Important electronics for automotive protection