MAX6382LT29D3+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. It is packaged with Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. Depending on the power managment ic you are looking at, you can find a total of 1 channels. As a reference, this IC power includes 6-WFDFN functions for your convenience. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. There is a specification for the peak reflow temperature of the package to be 260. There is a voltage supply of 1.8V for the PMIC chip, and the chip conducts at that voltage. Power ics operate at 1 supply voltages. Power management is included in the Surface Mount mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. Power management has a total of 6 pins. 6 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. We recommend setting the supervisors to -40°C~125°C TA degrees. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. There is a supply current of 7μA for the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6382, which is the base power ics number.

MAX6382LT29D3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6382LT29D3+T Applications

There are a lot of Maxim Integrated MAX6382LT29D3+T Voltage Supervisors applications.

• Leakage protection
• Stable power system
• Power distribution systems of ICU
• Analog circuit
• Insulation fault location system
• Low voltage/high power - AI, GPU
• Battery cars
• Satellite navigation
• Smart meter
• DVR