MAX6382LT46D3+T Overview
Power management is mounted through 6 terminals. Packaged in the form of a Tape & Reel (TR), power management is easy to use. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of 6-WFDFN functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. According to the specification, the package's peak reflow temperature is specified to be 260. When a supply voltage of 1.8V is applied to the power ic, it conducts. IC management conducts in a 1-voltage supply. Power management is included in the Surface Mount mount. The power management belongs to the Power Management Circuits subcategory. It has a total of 6 pins that are attached to IC management. The pins of the power management system count 6. Supply voltage (Vsup) should be at least 1V for this power management. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. The supply current of the power management is 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6382, the base power ics number.
MAX6382LT46D3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current
MAX6382LT46D3+T Applications
There are a lot of Maxim Integrated MAX6382LT46D3+T Voltage Supervisors applications.
- Microcontroller system
- Important electronics for automotive protection
- Power distribution systems of operating room
- Personal computers
- Detection of phase imbalance
- emergency room
- Utility meter
- Dash board
- Analog circuit
- Embedded computing
