MAX6382XR23D3+ Overview

This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. In this IC power you will find 1 functions for you to refer to. This power management is made up of 1 channels which are available in a series format. For your reference, this PMIC includes a list of SC-70, SOT-323 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. A supply voltage of 1.8V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. A IC power such as this can be classified as a Power Management Circuits power management system. 3 pins are present on the power management system. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~125°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole.

MAX6382XR23D3+ Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V

MAX6382XR23D3+ Applications

There are a lot of Maxim Integrated MAX6382XR23D3+ Voltage Supervisors applications.

• Radio
• Digitally controlled LDO regulators circuit
• Automotive power systems
• Efficient information transmission
• Power distribution systems of ICU
• Automotive permanent magnet synchronous motors
• Telecommunications equipment
• Detection of phase sequence
• Smart meter
• Satellite navigation