MAX6382XR25D2+T Overview

Power management is mounted through 3 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of SC-70, SOT-323 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. In a 1.8V supply voltage, the power management conducts. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. Taking into account all of the pins, this power management has a total of 3. 3 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6382, the base power ics number.

MAX6382XR25D2+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6382XR25D2+T Applications

There are a lot of Maxim Integrated MAX6382XR25D2+T Voltage Supervisors applications.

• Utility meter
• Smart meter
• Magnetic resonance imaging
• Unattended substation automation
• Household appliances
• Urban rail transit weak current power monitoring
• Important electronics for automotive safety
• Satellite navigation
• Electronics installed in the vehicle
• Computer applications