MAX6382XR36D1+T Overview
There are 3 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. During the reflow process, a peak temperature of 260 is specified for the package. In a 1.8V supply voltage, the power management conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. The power management system can be categorized as a Power Management Circuits chip. In total, it has 3 pins on IC management. There are 3 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). It is estimated that the voltage supervisor's supply current is 7μA.
MAX6382XR36D1+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current
MAX6382XR36D1+T Applications
There are a lot of Maxim Integrated MAX6382XR36D1+T Voltage Supervisors applications.
- DSP
- Military communications
- Automotive permanent magnet synchronous motors
- Transformer load monitoring equipment
- Power distribution systems of CCU
- Electronics installed in the vehicle
- emergency room
- Detection of phase sequence
- Detection of phase imbalance
- Solar power charger