MAX6382XR43D2-T Overview

This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tape & Reel (TR) model. Please refer to this PMIC for 1 functions. A series of 1 channels can be found on this supervisor. IC management is packaged as a SC-70, SOT-323 package. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 245 for the package during reflow. In a 1.8V supply voltage, the power management conducts. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts IC management. A IC power such as this can be classified as a Power Management Circuits power management system. In total, it has 3 pins on IC management. Power managment ic pin count is 3. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. Power management has an output of Push-Pull, Totem Pole during operation. As far as the supply current of the power management is concerned, it is 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6382, the base power ics number.

MAX6382XR43D2-T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6382XR43D2-T Applications

There are a lot of Maxim Integrated MAX6382XR43D2-T Voltage Supervisors applications.

• Insulation fault location system
• Data storage applications
• Satellite navigation
• Important electronics for automotive protection
• Solar power charger
• Smart meter
• Medical-specific insulation monitor
• Display equipment
• Household appliances
• Power distribution systems of infant care room