MAX6383LT22D3+T Overview

There are 6 terminals on this power management that allow it to be mounted. Power management is packaged in a Tape & Reel (TR) way. Please find attached 1 functions for your reference in this IC power. It is possible to find on this power management a series of 1 channels. There are 6-WFDFN functions included in this PMIC so that you can refer to them. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Packages are specified to have an average peak reflow temperature of 260. The supervisor is always powered by a 1.8V volt supply. IC management conducts in a 1-voltage supply. Using Surface Mount, IC management is mounted. A IC power such as this can be classified as a Power Management Circuits power management system. The total number of pins on this power management is 6. Power managment ic pin count is 6. It is recommended that Vsup should not be less than 1V for this IC power. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. There is a supply current of 7μA for the power management. A similar IC managements number of the manufacturer can always be found by using MAX6383, the base power ics number.

MAX6383LT22D3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6383LT22D3+T Applications

There are a lot of Maxim Integrated MAX6383LT22D3+T Voltage Supervisors applications.

• Electric heating appliances
• Stable power system
• Detection of phase imbalance
• Microcontroller system
• Analog circuit
• Important electronics for automotive safety
• Insulation fault location system
• Military electronics
• Radar
• Military communications