MAX6384LT17D1+T Overview

As you can see, this power management is mounted through 6 terminals. Packaged in the form of a Tape & Reel (TR), power management is easy to use. There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 1 channels, each of which can be used independently. Please refer to power management for 6-WFDFN functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. As specified in the package specification, the peak reflow temperature of the package is set at 260. A supply voltage of 1.8V is used to conduct the PMIC chip. During operation, the power ic is supplied with a voltage of 1. The power management is mounted by Surface Mount. There is a subcategory called Power Management Circuits for this power management. There are a total of 6 pins on power management. There are 6 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. A Surface Mount mounting type is recommended. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. There is a 7μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using MAX6384, the base power ics number.

MAX6384LT17D1+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6384LT17D1+T Applications

There are a lot of Maxim Integrated MAX6384LT17D1+T Voltage Supervisors applications.

• Detection of phase loss
• Smart meter
• Battery cars
• Transformer load monitoring equipment
• Power communication system
• Military electronics
• DSP
• WiFi router
• DVR
• Microcontroller system