1.8V6 Terminals 6-Pin MAX6384 Voltage supervisor1 Channels Min 1V Max 5.5V
SOT-23
MAX6384LT22D3+T Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
6-WFDFN
Number of Pins
6
Operating Temperature
-40°C~125°C TA
Packaging
Tape & Reel (TR)
Published
2012
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
6
ECCN Code
EAR99
Type
Simple Reset/Power-On Reset
Terminal Finish
Matte Tin (Sn)
Subcategory
Power Management Circuits
Max Power Dissipation
167.7mW
Technology
BICMOS
Terminal Position
DUAL
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
1.8V
Terminal Pitch
0.5mm
Base Part Number
MAX6384
Output
Push-Pull, Totem Pole
Pin Count
6
Number of Channels
1
Max Supply Voltage
5.5V
Min Supply Voltage
1V
Operating Supply Current
7μA
Adjustable Threshold
NO
Watchdog Timer
No
Reset
Active Low
Voltage - Threshold
2.19V
Number of Voltages Monitored
1
Reset Timeout
140ms Minimum
Min Reset Threshold Voltage
2.13V
Max Reset Threshold Voltage
2.24V
Undervoltage Threshold
1.54V
Overvoltage Threshold
1.61V
Height Seated (Max)
0.8mm
RoHS Status
ROHS3 Compliant
MAX6384LT22D3+T Product Details
MAX6384LT22D3+T Overview
There are 6 terminals connected to this power management, which makes it easy to mount. It is packaged with Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. To assist you, this PMIC includes 6-WFDFN functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. During operation, the power ic is supplied with a voltage of 1.8V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is attached to Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. Taking into account all of the pins, this power management has a total of 6. 6 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. There is a supply current of 7μA for the power management. A similar IC managements number of the manufacturer can always be found by using MAX6384, the base power ics number.
MAX6384LT22D3+T Features
Simple Reset/Power-On Reset type Minimum supply voltage of 1V 7μA operating supply current
MAX6384LT22D3+T Applications
There are a lot of Maxim Integrated MAX6384LT22D3+T Voltage Supervisors applications.