MAX6384LT28D2+T Overview

There are 6 terminals on this power management that allow it to be mounted. Power management is packaged in a Tape & Reel (TR) way. In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. There are 6-WFDFN functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. A supply voltage of 1.8V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 6 pins in it. Power managment ic pin count is 6. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. You should set the supervisor's temperature during -40°C~125°C TA . There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. In order to maintain a stable supply current for the power management, 7μA is the recommended value. For similar manage ics search of the manufacturer, you can always refer to MAX6384, the base PMIC number.

MAX6384LT28D2+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6384LT28D2+T Applications

There are a lot of Maxim Integrated MAX6384LT28D2+T Voltage Supervisors applications.

• Analog circuit
• Radar
• Power distribution systems of CCU
• Stable power system
• Multi-voltage system
• DSP
• Efficient information transmission
• Magnetic resonance imaging
• Microprocessor system
• Battery cars