MAX6385LT23D3+T Overview

It is mounted through 6 terminals on the power management. It is packaged with Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. This power management is made up of 1 channels which are available in a series format. Please find attached 6-WFDFN functions for your reference in this IC power. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 1.8V is used to conduct the PMIC chip. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is provided by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. A total of 6 pins are located on this power management. 6 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. We recommend setting the supervisors to -40°C~125°C TA degrees. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There is a 7μA supply current present in the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6385, which is the base power ics number.

MAX6385LT23D3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6385LT23D3+T Applications

There are a lot of Maxim Integrated MAX6385LT23D3+T Voltage Supervisors applications.

• Kitchen appliances
• Multi-voltage system
• Leakage current detection
• FPGA design
• Transformer load monitoring equipment
• Detection of phase loss
• Dash board
• Consumer electronics
• emergency room
• Battery cars