MAX6386LT26D7+T Overview

A total of 6 terminals are used to mount this power management. Tape & Reel (TR)-packaging is used. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels available on this supervisor, and each channel has a different function. There are 6-WFDFN functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. The supervisor is always powered by a 1.8V volt supply. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount mounts IC management. The power management belongs to the Power Management Circuits subcategory. The total number of pins on this power management is 6. 6 pins are on the supervisor. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. This range of temperature should be set for the supervisors: -40°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. For this power management, there is an 7μA volt supply current. To find similar IC managements from the manufacturer, you can always search by MAX6386.

MAX6386LT26D7+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6386LT26D7+T Applications

There are a lot of Maxim Integrated MAX6386LT26D7+T Voltage Supervisors applications.

• Important electronics for automotive safety
• FPGA design
• Digitally controlled LDO regulators circuit
• Microcontroller system
• Rechargeable batteries
• Detection of phase sequence
• Power communication system
• Smart meter
• Electrical fire monitoring system
• WiFi router