MAX6386LT28D7+T Overview

A total of 6 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. As a reference, this IC power includes 6-WFDFN functions for your convenience. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts at a voltage of 1.8V. IC management conducts in a 1-voltage supply. Surface Mount mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, IC powers are 6 pins on the board. 6 pins are present on the power management system. Supply voltage (Vsup) should be at least 1V for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. Power management has an output of Open Drain or Open Collector during operation. There is a supply current of 7μA for the power management. A similar IC managements number of the manufacturer can always be found by using MAX6386, the base power ics number.

MAX6386LT28D7+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6386LT28D7+T Applications

There are a lot of Maxim Integrated MAX6386LT28D7+T Voltage Supervisors applications.

• Transformer load monitoring equipment
• Consumer electronics
• Power distribution systems of infant care room
• FPGA design
• Important electronics for automotive safety
• Digitally controlled LDO regulators circuit
• Precision measurement
• DSP
• Rechargeable batteries
• Power communication system