MAX6388XS31D3+T Overview

This voltage supervisor has a total of 4 mounting terminals that can be used for mounting. Strip-packaging is used. Please refer to this PMIC for 1 functions. Power management consists of 1 channels, each of which can be used independently. Please refer to power management for SC-82A, SOT-343 functions. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. According to the specification, the package's peak reflow temperature is specified to be 260. IC management conducts at a voltage of 1.8V. In a 2 supply voltage, the PMIC chip conducts. Using Surface Mount, IC management is mounted. The power management belongs to the Power Management Circuits subcategory. Taking into account all of the pins, this power management has a total of 4. 4 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. There is a supply current of 7μA for the power management. As well as this, there are other features to mention such as [0], for example.

MAX6388XS31D3+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1V
7μA operating supply current

MAX6388XS31D3+T Applications

There are a lot of Maxim Integrated MAX6388XS31D3+T Voltage Supervisors applications.

• Radar
• Telecommunications equipment
• DC stabilized power supply module
• Digitally controlled LDO regulators circuit
• Microprocessor system
• Power distribution systems of infant care room
• Battery-powered equipment
• Satellite navigation
• Fire equipment power monitoring system
• Consumer electronics