MAX6389LT22D2+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this PMIC, you can find 1 functions for your reference. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this PMIC, you can find 6-WFDFN functions for your reference. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 1.8V is used to conduct the PMIC chip. Power ics operate at 2 supply voltages. Surface Mount mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. A total of 6 pins are located on this power management. The pins of the power management system count 6. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~125°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 7μA. You can always use MAX6389, the base supervisor number, to search for similar PMICs of the manufacturer.

MAX6389LT22D2+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1V
7μA operating supply current

MAX6389LT22D2+T Applications

There are a lot of Maxim Integrated MAX6389LT22D2+T Voltage Supervisors applications.

• Insulation fault location system
• Urban rail transit weak current power monitoring
• Kitchen appliances
• WiFi router
• Solar power charger
• Military communications
• Medical-specific insulation monitor
• Power distribution systems of ICU
• Analog circuit
• Satellite navigation