MAX6391KA22+T Overview

A total of 8 terminals are used to mount this power management. Packaging is in the form of a Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 2 channels. In this IC management you will find SOT-23-8 functions for you to refer to. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. IC management is specified that the package peak reflow temperature should be 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 2 is used to conduct the PMIC chip. The power management is mounted by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. Power management has a total of 8 pins. 8 pins are on the supervisor. It is recommended that Vsup should not be less than 1V for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. It is estimated that the voltage supervisor's supply current is 15μA. You can always use MAX6391, the base supervisor number, to search for similar PMICs of the manufacturer. The voltage supervisor requires a power source of 1.5/5V volts in order to work correctly.

MAX6391KA22+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1V
15μA operating supply current

MAX6391KA22+T Applications

There are a lot of Maxim Integrated MAX6391KA22+T Voltage Supervisors applications.

• Solar power charger
• Display equipment
• Unattended substation automation
• Important electronics for automotive protection
• Battery cars
• Rechargeable batteries
• Dash board
• Power communication system
• External alarm
• Power distribution systems of operating room