MAX6394US470D2+T Overview
A total of 4 terminals are used to mount this power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. For your reference, this PMIC includes a list of TO-253-4, TO-253AA functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. IC management conducts at a voltage of 3.6V. During operation, the power ic is supplied with a voltage of 1. By Surface Mount, IC management has been mounted. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 4 pins on the board. The pins of the power management system count 4. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. In this case, Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. It is always advisable to use MAX6394, the base supervisor number, when searching for similar PMICs from the manufacturer. The power management must be powered by 3/5V volts to function properly. At the most, voltage supervisor can work with a supply temperature of 15μA.
MAX6394US470D2+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
MAX6394US470D2+T Applications
There are a lot of Maxim Integrated MAX6394US470D2+T Voltage Supervisors applications.
- External alarm
- Stable power system
- Radio
- Utility meter
- Battery cars
- Rechargeable batteries
- DC stabilized power supply module
- Telecommunications equipment
- Power distribution systems of infant care room
- Computer applications
