MAX6394US480D1+T Overview

Power management is mounted through 4 terminals. Power management is packaged in a Tape & Reel (TR) way. The purpose of this IC management is to provide you with a reference of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. There are TO-253-4, TO-253AA functions included in this PMIC so that you can refer to them. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. A supply voltage of 3.6V is used to conduct the PMIC chip. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. By Surface Mount, IC management has been mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. 4 pins are present in total in this power management. This power management system has 4 pins. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. We recommend setting the supervisors to -40°C~125°C TA degrees. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. It is always advisable to use MAX6394, the base supervisor number, when searching for similar PMICs from the manufacturer. To operate this power management, you will need at least 3/5V volts of power. At most, voltage supervisor can operate at a supply temperature of 15μA.

MAX6394US480D1+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V

MAX6394US480D1+T Applications

There are a lot of Maxim Integrated MAX6394US480D1+T Voltage Supervisors applications.

• Stable power system
• Electronics installed in the vehicle
• Household appliances
• Embedded computing
• Medical-specific isolation transformer
• Magnetic resonance imaging
• Kitchen appliances
• Telecommunications equipment
• Electrical fire monitoring system
• Unattended substation automation