MAX6394US480D2+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 4 in total. It is packaged with Tape & Reel (TR). To assist you, this IC power includes 1 functions. Power management consists of 1 channels, each of which can be used independently. Please find attached TO-253-4, TO-253AA functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Manage ics operate at 3.6V supply voltages. Power management conducts at a voltage of 1. The power management is mounted by a Surface Mount-axis. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 4. Power managment ic pin count is 4. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to -40°C~125°C TA degrees. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. A similar IC managements number of the manufacturer can always be found by using MAX6394, the base power ics number. It is necessary to have 3/5V volts of power in order for this voltage supervisor to operate. At the most, voltage supervisor can work with a supply temperature of 15μA.

MAX6394US480D2+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V

MAX6394US480D2+T Applications

There are a lot of Maxim Integrated MAX6394US480D2+T Voltage Supervisors applications.

• Medical-specific isolation transformer
• Consumer electronics
• Satellite navigation
• Efficient information transmission
• emergency room
• Power distribution systems of operating room
• Radar
• Functional modules
• Network equipment
• Personal computers