MAX6403BS41+T Overview

This voltage supervisor has a total of 4 mounting terminals that can be used for mounting. It is packaged with Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. There are 1 channels on this power managment ic that can be found in a series. There are 4-WFBGA, CSPBGA functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. A supply voltage of 3V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. In total, the power management has 4 pins in it. This power management has 4 pins. Supply voltage (Vsup) should be at least 1V for this power management. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. We recommend setting the supervisors to -40°C~85°C degrees. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. In order to maintain a stable supply current for the power management, 1μA is the recommended value. For similar manage ics search of the manufacturer, you can always refer to MAX6403, the base PMIC number.

MAX6403BS41+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1μA operating supply current

MAX6403BS41+T Applications

There are a lot of Maxim Integrated MAX6403BS41+T Voltage Supervisors applications.

• Automotive power systems
• Leakage protection
• Power communication system
• Radio
• Detection of phase loss
• Sensitive sensors
• Radar
• Insulation fault location system
• Power distribution systems of operating room
• Dash board