MAX6403BS42+T Overview

It is mounted through 4 terminals on the power management. In terms of packaging, power management follows the Tape & Reel (TR) model. As a reference, this IC management includes 1 functions for your convenience. It is possible to find on this power management a series of 1 channels. There are 4-WFBGA, CSPBGA functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. Manage ics operate at 3V supply voltages. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Surface Mount. 4 pins are present in total in this power management. The pins of the power management system count 4. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. In this case, Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C. During operation, this power management system outputs Push-Pull, Totem Pole. The supervisor's supply current is specified to 1μA. To find similar IC managements from the manufacturer, you can always search by MAX6403.

MAX6403BS42+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1μA operating supply current

MAX6403BS42+T Applications

There are a lot of Maxim Integrated MAX6403BS42+T Voltage Supervisors applications.

• Military communications
• Kitchen appliances
• Battery-powered equipment
• Power distribution systems of operating room
• Functional modules
• Electronics installed in the vehicle
• Multi-voltage system
• Urban rail transit weak current power monitoring
• Power communication system
• Computer applications