MAX6408BS26+T Overview

There are 4 terminals on this power management that allow it to be mounted. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. In this PMIC, you can find 1 functions for your reference. There are 1 channels on this power managment ic that can be found in a series. Please refer to power management for 4-WFBGA, CSPBGA functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When a supply voltage of 3V is applied to the power ic, it conducts. IC management conducts in a 1-voltage supply. Surface Mount is the one that mounts power management. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, IC powers are 4 pins on the board. This power management has 4 pins. A voltage (Vsup) that doesn't fall below 1.2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type is Surface Mount. This range of temperature should be set for the supervisors: -40°C~85°C. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 1μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6408, which is the base power ics number.

MAX6408BS26+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
1μA operating supply current

MAX6408BS26+T Applications

There are a lot of Maxim Integrated MAX6408BS26+T Voltage Supervisors applications.

• Dash board
• Telecommunications equipment
• DVR
• FPGA design
• Display equipment
• Magnetic resonance imaging
• Embedded computing
• Power distribution systems of infant care room
• WiFi router
• Radar