MAX6409BS40+T Overview

This voltage supervisor has a total of 4 mounting terminals that can be used for mounting. Packaging is in the form of a Tape & Reel (TR). Please refer to this PMIC for 1 functions. A series of 1 channels can be found on this supervisor. IC management is packaged as a 4-WFBGA, CSPBGA package. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 3V for the PMIC chip, and the chip conducts at that voltage. Power ics operate at 1 supply voltages. The mount is attached to Surface Mount. In total, the power management has 4 pins in it. 4 pins make up the power management. There should be a minimum voltage supply (Vsup) of 1.2V for this PMIC. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. In this case, Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. The supervisor's supply current is specified to 1μA. You can always use MAX6409, the base supervisor number, to search for similar PMICs of the manufacturer.

MAX6409BS40+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
1μA operating supply current

MAX6409BS40+T Applications

There are a lot of Maxim Integrated MAX6409BS40+T Voltage Supervisors applications.

• Satellite navigation
• Military electronics
• Radio
• Consumer electronics
• Military communications
• Power communication system
• Analog circuit
• Refrigeration
• Kitchen appliances
• Power distribution systems of ICU