MAX6409BS43+T Overview

This voltage supervisor has a total of 4 mounting terminals that can be used for mounting. Packaging is in the form of a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. For your reference, this PMIC includes a list of 4-WFBGA, CSPBGA functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 3V is applied to the power ic, it conducts. Power ics operate at 1 supply voltages. Power management is included in the Surface Mount mount. There are a total of 4 pins on power management. 4 pins make up the power management. Supply voltage (Vsup) should be at least 1.2V for this power management. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. This range of temperature should be set for the supervisors: -40°C~85°C. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. There is a supply current of 1μA for the power management. You can always use MAX6409, the base supervisor number, to search for similar PMICs of the manufacturer.

MAX6409BS43+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
1μA operating supply current

MAX6409BS43+T Applications

There are a lot of Maxim Integrated MAX6409BS43+T Voltage Supervisors applications.

• Automotive permanent magnet synchronous motors
• Detection of phase sequence
• Insulation fault location system
• Microprocessor system
• Electric heating appliances
• Microcontroller system
• Detection of phase loss
• WiFi router
• Radio
• Satellite navigation