MAX6410BS46+T Overview
There are 4 terminals connected to this power management, which makes it easy to mount. Packaged in the form of a Tape & Reel (TR), power management is easy to use. For your reference, this IC power includes a list of 1 functions. Power management consists of 1 channels, each of which can be used independently. There are 4-WFBGA, CSPBGA functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. During the reflow process, a peak temperature of 260 is specified for the package. When 3V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. The power management belongs to the Power Management Circuits subcategory. In total, it has 4 pins on IC management. The pins of the power management system count 4. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountThe supervisors should be set to the following temperature: -40°C~85°C. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. For this power management, there is an 1μA volt supply current. You can always use MAX6410, the base supervisor number, to search for similar PMICs of the manufacturer.
MAX6410BS46+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
1μA operating supply current
MAX6410BS46+T Applications
There are a lot of Maxim Integrated MAX6410BS46+T Voltage Supervisors applications.
- emergency room
-
- Battery cars
-
- Satellite navigation
-
- Radio
-
- Radar
-
- Dash board
-
- Functional modules
-
- Military electronics
-
- Data storage applications
-
- Important electronics for automotive safety
-
