MAX6412UK26+T Overview

This power management consists of 5 mounting terminals on which it can be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. As a reference, this IC management includes 1 functions for your convenience. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. The supervisor is always powered by a 5V volt supply. During operation, the power ic is supplied with a voltage of 1. The mount is attached to Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 5 pins on the board. Power managment ic pin count is 5. IC management can only work with a supply voltage of 1V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. In this case, Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The supervisor's supply current is specified to 2.7μA. In addition, IC management are other features such as [0], to mention only a few. You can always use MAX6412, the base supervisor number, to search for similar PMICs of the manufacturer.

MAX6412UK26+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
2.7μA operating supply current

MAX6412UK26+T Applications

There are a lot of Maxim Integrated MAX6412UK26+T Voltage Supervisors applications.

• Household appliances
• Microcontroller system
• Smartphones
• Detection of phase loss
• DC stabilized power supply module
• Dash board
• Electronics installed in the vehicle
• Radar
• FPGA design
• Personal computers