MAX6412UK29+T Overview

This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. It is packaged with Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. There are 1 channels on this power managment ic that can be found in a series. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 5V volt supply. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 5. The pins of the power management system count 5. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. In this case, Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. There is a 2.7μA supply current present in the power management. Additionally, there are many other features that can be found inside of the power management, such as [0]. For similar manage ics search of the manufacturer, you can always refer to MAX6412, the base PMIC number.

MAX6412UK29+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
2.7μA operating supply current

MAX6412UK29+T Applications

There are a lot of Maxim Integrated MAX6412UK29+T Voltage Supervisors applications.

• Personal computers
• Rechargeable batteries
• DC stabilized power supply module
• Dash board
• Electronics installed in the vehicle
• Microcontroller system
• Medical-specific insulation monitor
• Sensitive sensors
• Smartphones
• Telecommunications equipment