MAX6420UK17+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. A Tape & Reel (TR) package is used to package the power management. Please find attached 1 functions for your reference in this IC power. This power management is made up of 2 channels which are available in a series format. To assist you, this PMIC includes SC-74A, SOT-753 functions. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. During operation, the power ic is supplied with a voltage of 5V. Power ics operate at 2 supply voltages. The power management is mounted by Surface Mount. The power management belongs to the Power Management Circuits subcategory. Power management has a total of 5 pins. 5 pins are on the supervisor. Supply voltage (Vsup) should be at least 1V for this power management. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management recommends the Surface Mount mounting type. We recommend setting the supervisors to -40°C~125°C TA degrees. Power management has an output of Open Drain or Open Collector during operation. For this power management, there is an 2.7μA volt supply current. Additionally, IC management are a variety of features, for example [0], to name a few. It is always advisable to use MAX6420, the base supervisor number, when searching for similar PMICs from the manufacturer.

MAX6420UK17+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1V
2.7μA operating supply current

MAX6420UK17+T Applications

There are a lot of Maxim Integrated MAX6420UK17+T Voltage Supervisors applications.

• DSP
• Urban rail transit weak current power monitoring
• Unattended substation automation
• Leakage protection
• Battery-powered equipment
• Multi-voltage system
• Detection of phase sequence
• WiFi router
• Kitchen appliances
• Set top box