MAX6424UK22+T Overview

As you can see, this power management is mounted through 5 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. For your reference, this IC power includes a list of 1 functions. There are 1 channels on this power managment ic that can be found in a series. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When 5V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 1. Surface Mount is the one that mounts power management. There is a subcategory of this power ic known as Power Management Circuits. In total, it has 5 pins on IC management. This power management has 5 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Mounting type Surface Mount is recommended. This range of temperature should be set for the supervisors: -40°C~125°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. There is a supply current of 2.5μA for the power management. A similar IC managements number of the manufacturer can always be found by using MAX6424, the base power ics number.

MAX6424UK22+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
2.5μA operating supply current

MAX6424UK22+T Applications

There are a lot of Maxim Integrated MAX6424UK22+T Voltage Supervisors applications.

• Medical-specific isolation transformer
• Precision measurement
• Power distribution systems of ICU
• Solar power charger
• Detection of phase loss
• Electronics installed in the vehicle
• Display equipment
• Microprocessor system
• Insulation fault location system
• Analog circuit