MAX6424UK26+T Overview

It is mounted through 5 terminals on the power management. Power management is packaged in a Tape & Reel (TR) way. In this IC power you will find 1 functions for you to refer to. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 5 pins on power management. 5 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type for IC management is Surface Mount. This range of temperature should be set for the supervisors: -40°C~125°C TA. Power management has an output of Push-Pull, Totem Pole during operation. As far as the supply current of the power management is concerned, it is 2.5μA. You can always use MAX6424, the base supervisor number, to search for similar PMICs of the manufacturer.

MAX6424UK26+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
2.5μA operating supply current

MAX6424UK26+T Applications

There are a lot of Maxim Integrated MAX6424UK26+T Voltage Supervisors applications.

• Leakage current detection
• Electrical fire monitoring system
• Automotive permanent magnet synchronous motors
• Medical-specific isolation transformer
• Urban rail transit weak current power monitoring
• Military communications
• Magnetic resonance imaging
• Detection of phase sequence
• Satellite navigation
• DC stabilized power supply module