MAX6424UK31+T Overview

This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Packaged in the form of a Tape & Reel (TR), power management is easy to use. As a reference, this IC management includes 1 functions for your convenience. Power management consists of 1 channels, each of which can be used independently. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. In a 5V supply voltage, the power management conducts. IC management conducts in a 1-voltage supply. Power management is included in the Surface Mount mount. There is a subcategory called Power Management Circuits for this power management. A total of 5 pins are located on this power management. Pin count of the power management is 5. It is recommended that Vsup should not be less than 1V for this IC power. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Power management recommends the Surface Mount mounting type. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. Power management has an output of Push-Pull, Totem Pole during operation. For this power management, there is an 2.5μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6424, which is the base power ics number.

MAX6424UK31+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
2.5μA operating supply current

MAX6424UK31+T Applications

There are a lot of Maxim Integrated MAX6424UK31+T Voltage Supervisors applications.

• Utility meter
• Consumer electronics
• Analog circuit
• Microcontroller system
• Urban rail transit weak current power monitoring
• Electric heating appliances
• Set top box
• Unattended substation automation
• Efficient information transmission
• Leakage current detection