MAX6439UTBGWD7+T Overview
It is appropriate for the SOT-23-6 package. This system battery uses an analog integrated circuit (IC) called POWER SUPPLY SUPPORT CIRCUIT. As of right 2w, there are 2 channels available. 6 pins are attached to it. Use Surface Mount to mount this electronic component. A minimum supply voltage of 1V volts is required for this electric part. Electronic parts in the Power Management Circuits family are found here. This power IC's supplied voltage should not exceed 5.5V volts. If you want to activate this system battery, it must be at least -40°C. It is suggested that it be used at temperatures below 85°C. A 1.2/5V volt battery powers it. There are a total of 6 pins on it. There should be a voltage below 3.383V as the minimum reset threshold voltage for the battery protector ic. A power IC's minimum reset threshold voltage should be higher than 3.218V.
MAX6439UTBGWD7+T Features
Available in SOT-23-6 Package
with 6 Pins
The Min Reset Threshold Voltage at 3.218V
MAX6439UTBGWD7+T Applications
There are a lot of Maxim Integrated MAX6439UTBGWD7+T Battery Management ICs applications.
- PV timeshift
- Robots
- Grid support
- Industrial drones
- Motor drive - 3 phase AC100V-240V AC servo
- Home appliances
- Peak shaving
- Non-road type vehicles
- Motor drive - single phase AC100V-240V non -isolated
- On-board battery charger
