MAX6439UTOQZD3+T Overview
It is appropriate for the SOT-23-6 package. Analog IC POWER SUPPLY SUPPORT CIRCUIT is used in this power IC. We have 2 channels available. 6 pins are present on it. It is recommended that you mount this electrical component using Surface Mount. In order for this electric part to operate properly, its supply voltage must not be lower than 1V volts. In this case, it's a Power Management Circuits family electronic part. 5.5V voltage greater than 5.5V volts should be supplied to this electronic battery. Activation of this smart tools battery requires a value greater than 0. It should be used at temperatures below 85°C. Power comes from a 1.2/5V volt source. There are a total of 6 pins on it. 2.313 RESET THESHOLD VOLTAGE; BATTERY HTH AND LTH ARE 2.3V AND 2.0V can be discovered in this power management IC when used. A battery management IC's minimum reset threshold voltage should be less than 2.358V. There should be a voltage above 2.243V for the power IC's reset threshold.
MAX6439UTOQZD3+T Features
Available in SOT-23-6 Package
with 6 Pins
The Min Reset Threshold Voltage at 2.243V
MAX6439UTOQZD3+T Applications
There are a lot of Maxim Integrated MAX6439UTOQZD3+T Battery Management ICs applications.
- Air conditioner
- Motor drive - 3 phase AC100V-240V AC servo
- Refrigerator
- Electric cars
- On-board battery charger
- Sports cars
- ADAS Lidar
- Wearables
- Continually optimizing battery performance
- Buses
