MAX6440UTBJTD3+T Overview
This package corresponds to SOT-23. POWER SUPPLY SUPPORT CIRCUIT is the analog IC used by this power management IC. It is possible to access 2 channels. The smart tools battery has 6 pins in total. Mount this electronic part using Surface Mount. It is recommended that this electric part's minimum supply voltage not be less than 1V volts. An electrical component of the type Power Management Circuits can be found here. 5.5V voltage greater than 5.5V volts should be supplied to this electronic battery. You cannot activate this smart tools battery if it is less than -40°C. The electronic battery should be used below 85°C degrees Celsius. The manage ICs is powered by an electric current of 1.2/5V volts. 6 pins are present on it. There should be a voltage below 3.69V as the minimum reset threshold voltage for the battery protector ic. Power ICs should have a reset threshold voltage above 3.51V.
MAX6440UTBJTD3+T Features
Available in SOT-23 Package
with 6 Pins
The Min Reset Threshold Voltage at 3.51V
MAX6440UTBJTD3+T Applications
There are a lot of Maxim Integrated
MAX6440UTBJTD3+T Battery Management ICs applications.
- Electric-powered machinery
- Fork lifts
- Grid power infrastructure
- Cell phone towers
- A/C power substations
- Internet infrastructure equipment
- Aviation ground support systems
- Tower communications
- Weather stations
- Distributed energy resources
