MAX6441KAOQRD7+T Overview
The package SOT-23 is appropriate for battery instrument. POWER SUPPLY SUPPORT CIRCUIT is the analog IC used by this power management IC. It is possible to access 2 channels. The total number of pins is 8. To mount this electrical component, use Surface Mount. A minimum supply voltage of 1V volts is required for this electric part. Power Management Circuits is a family of electronic parts. 5.5V voltage greater than 5.5V volts should be supplied to this electronic battery. If you want to activate this system battery, it must be at least -40°C. Temperatures below 85°C are recommended for its use. A 1.2/5V volt supply powers it. On it, there are 8 pins. In this battery instrument, 2.625 RESET THESHOLD VOLTAGE; BATTERY HTH AND LTH ARE 2.3V AND 2.0V can be detected.
MAX6441KAOQRD7+T Features
Available in SOT-23 Package
with 8 Pins
MAX6441KAOQRD7+T Applications
There are a lot of Maxim Integrated MAX6441KAOQRD7+T Battery Management ICs applications.
- Hybrid electric vehicles
- Cell phone towers
- Lifts and cranes
- ADAS sonar
- Service robotics
- Monitoring the battery
- Rear light with dynamic control
- xEV charging station (off-board charger)
- Golf cars
- Scooters
