MAX6443US26L+T Overview

Power management is mounted through 4 terminals. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find TO-253-4, TO-253AA functions for you to refer to. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. According to the specification, the package's peak reflow temperature is specified to be 260. IC management conducts in a 3.6V-voltage supply. In a 1 supply voltage, the PMIC chip conducts. By Surface Mount, IC management has been mounted. There is a subcategory called Power Management Circuits for this power management. It has a total of 4 pins that are attached to IC management. Power managment ic pin count is 4. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. For this power management, there is an 7μA volt supply current. Supervisors are also additional features, such as [0] for example, which are worth mentioning. It is always advisable to use MAX6443, the base supervisor number, when searching for similar PMICs from the manufacturer.

MAX6443US26L+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6443US26L+T Applications

There are a lot of Maxim Integrated MAX6443US26L+T Voltage Supervisors applications.

• Battery cars
• DVR
• Medical-specific isolation transformer
• Military electronics
• Smartphones
• Urban rail transit weak current power monitoring
• Insulation fault location system
• Important electronics for automotive protection
• FPGA design
• Network equipment