MAX6449UT23L+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. Tape & Reel (TR)-packaging is used. Please refer to this PMIC for 1 functions. This power management is made up of 1 channels which are available in a series format. The purpose of this IC power is to provide you with a reference of SOT-23-6 functions. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. There is a specification for the peak reflow temperature of the package to be 260. During operation, the power ic is supplied with a voltage of 3.6V. IC management is possible to find a succession of 2 voltages that have been checked. Surface Mount mounts IC management. This power ic can be sub-categorized as Power Management Circuits. The total number of pins on this power management is 6. Pin count of the power management is 6. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. Temperature setting for the supervisors should be -40°C~85°C. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. It is estimated that the voltage supervisor's supply current is 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6449, the base power ics number.

MAX6449UT23L+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1V
7μA operating supply current

MAX6449UT23L+T Applications

There are a lot of Maxim Integrated MAX6449UT23L+T Voltage Supervisors applications.

• Power distribution systems of CCU
• Detection of phase imbalance
• Power distribution systems of operating room
• Stable power system
• Automotive power systems
• Kitchen appliances
• Power distribution systems of infant care room
• Electrical fire monitoring system
• Household appliances
• Sensitive sensors