MAX6462UR23+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Power management is packaged in a Tape & Reel (TR) way. To assist you, this IC power includes 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. As a reference, this IC power includes TO-236-3, SC-59, SOT-23-3 functions for your convenience. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. As specified in the package specification, the peak reflow temperature of the package is set at 260. When 3.6V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is attached to Surface Mount. The total number of pins on this power management is 3. The pins of the power management system count 3. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The supply voltage (Vsup) should not exceed 6V volts in this IC power. The recommended mounting type is Surface Mount. This range of temperature should be set for the supervisors: -40°C~125°C. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 3.5μA. It is always advisable to use MAX6462, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature that PMIC chip can work with is 3.5μA.

MAX6462UR23+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
3.5μA operating supply current

MAX6462UR23+T Applications

There are a lot of Maxim Integrated MAX6462UR23+T Voltage Supervisors applications.

• Detection of phase imbalance
• Leakage protection
• Urban rail transit weak current power monitoring
• Multi-voltage system
• Transformer load monitoring equipment
• Power distribution systems of ICU
• Kitchen appliances
• Analog circuit
• Radar
• Electric heating appliances