MAX6462UR24+T Overview

Power management is mounted through 3 terminals. Tape & Reel (TR)-packaging is used. In this PMIC, you can find 1 functions for your reference. There are 1 channels on this power managment ic that can be found in a series. Please find attached TO-236-3, SC-59, SOT-23-3 functions for your reference in this IC power. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. There is a voltage supply of 3.6V for the PMIC chip, and the chip conducts at that voltage. IC management conducts in a 1-voltage supply. Surface Mount is the one that mounts power management. Taking into account all of the pins, this power management has a total of 3. There are 3 pins on the supervisor. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The supply voltage (Vsup) should not exceed 6V volts in this IC power. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This range of temperature should be set for the supervisors: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 3.5μA. A similar IC managements number of the manufacturer can always be found by using MAX6462, the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 3.5μA.

MAX6462UR24+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
3.5μA operating supply current

MAX6462UR24+T Applications

There are a lot of Maxim Integrated MAX6462UR24+T Voltage Supervisors applications.

• Dash board
• Important electronics for automotive protection
• Detection of phase imbalance
• Data storage applications
• Military electronics
• Microcontroller system
• Radar
• Battery-powered equipment
• Embedded computing
• Automotive power systems